USB Boot

Preparation of USB pen drive:

Step 1. Download utility form below link

ftp://ftpguest:letmein@ftp.vxl.net/Utilities/ImagingToolLX/ImagingTool.rar

Step 2. Extract the zip file “ImagingTool.rar”

Step 3. Insert the USB‐Key (Pendrive) to system

Step 4. Format the USB Key (PENDRIVE) with Fat32 FS

Step 5. Launch the unetbootin‐windows‐408.exe file

Step 6. Select the Disk image browse for the ISO file extracted “Image for LinuxR1.iso.

 




Step 7. Select the Type “USB Drive” then select Drive {Drive letter where USB KEY (pendrive) is mapped} 

Step 9. Click Exit, Eject the pendrive and plu‐in again.

Step 10. Create folder “Image” on USB Key (Pen Drive)

Step 11. Copy .tbi files on image folder created.

Now Pen drive is ready for the re‐flashing.

Re‐flashing procedure:

Step 1. Plug‐in the pen drive to thin client

Step 2. Power on the thin client

Step 3. Go to CMOS and change the boot order, to boot it from a USB Key (Pen Drive)

(if USB Key does not appear in the Hard disk boot order, then in COMS > Integrated Peripherals > USB    Device Settings.

Change mode to HDD mode from Auto of listed USB Key (Pen drive) under ***USB Mass Storage Device
BootSettings*** and then save changes and reboot the thin client and go to COMS settings and select the boot device as USB Key (Pen drive)